Equipment & Workshop
Equipped with industry-leading pick-and-place, reflow, wave soldering, inspection and reliability testing equipment to ensure quality and delivery.
SMT Production Line Equipment
7 core placement and inspection machines covering paste printing, placement, reflow, wave soldering and conformal coating

Yamaha YS20 High-speed Placement Machine
Core SMT placement equipment supporting dual-track production with parallel dual-lane output on small boards.
- Small board (200 points): 300 pcs/hour
- Standard power board (400 points): 180~220 pcs/hour
- High-density board (800 points): 90~120 pcs/hour

SPI Solder Paste Inspection
3D solder paste inspection with XY repeat accuracy ≤±10μm and height repeat accuracy ≤1μm.
- Standard large board (300×300mm): 400~480 pcs/hour
- Medium board (200×200mm): 550~650 pcs/hour
- High-density board (BGA/03015): 250~350 pcs/hour

X-ray Inspection Equipment
Non-destructive internal inspection of BGA, CSP and QFN solder joints, detecting voids, holes, bridging, cold solder and offset.

X-ray Intelligent Component Counter
Rapidly counts SMT reel components using X-ray, with counting accuracy ≥99.99%.
- 7-inch reels (4 at once): 1200~1800 reels/hour
- 13~17-inch reels (1 at once): 450~600 reels/hour

Ten-zone Dual-track Reflow Oven
10 top and 10 bottom independent heating zones, 2-stage forced cooling, each zone with independent PID control.
- Small board (200mm): 700~900 pcs/hour
- Standard board (300mm): 450~600 pcs/hour
- Long/high-density BGA (350~400mm): 320~420 pcs/hour

Nissin NSI-350S Dual-wave Soldering
Solders through-hole and mixed PCBs, completing soldering of component leads via molten solder wave.
- Small board (150mm): 800~1200 pcs/hour
- Standard board (250~300mm): 450~700 pcs/hour
- Long/high-density (350mm): 300~400 pcs/hour

HP-730 Inline Selective Conformal Coating Machine
Selectively coats PCBs with conformal coating after SMT, providing insulation, moisture and corrosion protection.
- Small PCB: 1200~1800 pcs/hour
- Medium/large PCB: 300~800 pcs/hour
- Conveyor speed 0~5000mm/min, repeat accuracy ±0.02mm
Reliability Testing Equipment
Temperature-humidity, thermal shock, push-pull, salt spray and spectrographic testing equipment





Production Workshop
Fully air-conditioned dust-free ESD workshop in a high-standard manufacturing environment













